Labor Saving Devices® 81-714 RoyRods™ Quick Connect Female Tip 1/8” x 6ft. Mesh Pull Sock

Today’s technology often requires installation of multiple wires, cables and structured cabling. Retrofit installation of such lines has always been difficult if not impossible to accomplish without damaging your cables or otherwise spending enormous time trying to prevent damage or loss of cable during the installation process. Elaborate wire preparation is usually required – stripping, staggering the ends of bundled cables, and using time consuming taping techniques needed to secure the bundle together and to attach it to a strong pull line. What if you could avoid all that time and hassle? You can – with Labor Saving Devices® unique pull socks made of their proprietary DuraSoc™ material.

Faster, Safer, and Easier!

The patented, non-conductive pull sock wire pulling approach uses a unique pull sock material that is flexible, expandable and contractible. Similar to a “Chinese finger trap,” these socks can be easily slipped over cable bundles and pre-connectorized cables yet provide a super strong grip on the cable under pulling tension.

Why Use Pull Socks?

No wire stripping is required, and there’s no need to stagger bundled cable ends. Pull Socks are easy to attach and remove, and will minimize binding and catches on corners, wood splinters and edges. The 6ft. x 1/8” Mesh Pull Sock provides a smooth protective surface over cables, and allows you to pull wires up to one RG6 or equivalent in size. The RoyRods™ Quick Connect Female Tip 1/8” x 6ft. Mesh Pull Sock connects to RoyRods™ wire running rods with a simple snap!