2GIG BRDG1-900, GO! BRIDGE IP Communicator

Go with the GO! Bridge IP Communicator. This must have product supports firmware updates over the Internet, provides interactive security services, and enables supervision using signal-forwarding to the Central Station. For wireless communication with the Control Panel, the 900MHz Transceiver Module (2GIG-XCVR2-345) must be installed in the panel. The Go!Bridge also connects to the Internet via a local network router using an Ethernet cable (not provided).

Convenient Connectivity

The Go!Bridge™ IP Communicator (2GIG-BRDG1-900) provides Internet connectivity between the GC2 Panel and the monitoring service’s Central Station. To enable connectivity, the 900 MHz Transceiver (2GIG-XCVR2-345) must be installed in the Control Panel.

Easy Setup

Install behind firewalls for DHCP addressing for IP Network with no hassle. Connect to hub/router quickly using CAT5 Ethernet. 900MHz frequency offers wireless panel integration, and remote access is available via the internet or a smartphone.

There are no support documents available for this product at this time.

Wireless Signal Range	500 ft, open air with Wireless Control Panel
Transceiver	Silicon Labs SI 1001-E-GM2
Transceiver Frequency	25 channel frequency-hopping spread spectrum, 403 kHz channel spacing (910.2-920.275 MHz)
Modulation Type	GFSK modulation, 128 kpbs
RF Power	+19dBm Maximum
Ethernet	10/100 BaseT
Dimensions (L x W x H)	6.24 x 4.5 x 1 in
Weight	9.6 oz
Housing Material	Cycoloy™ Resin C2800 (Rated to UL 84 V-0: Flammability Standard
Color	White
Operating Temperature	32° F to 120.2° F, (0° C to +49° C)
Relative Humidity	5-95% Non-Condensing
Operating Voltage	5VDC
Certification	ETL, FCC, IC, IFETEL, and NOM
System Requirments
GC2 Panel
Firmware version 1.12 or higher
2GIG-XCVR-345 900 MHz Transceiver
Internet connection